Pages

Thursday 1 March 2012

Rustins Varnishes

Continuing with the Rustins theme from previous weeks this post with focus on the range of varnishes available from the Rustins brand. Again these are products available from both our Port Talbot store and online store.

If you're looking for a quality clear varnish Rustins produce a range of clear polyurethane varnishes in gloss, satin and matt finishes. These are a tough durable finish resistant to oil, water and many chemicals for all woodwork and cork. You need to apply 2-3 coats for the perfect finish and re-coating time is 2-8 hours. These varnishes can also be applied over Rustin’s Wood Dyes to give a fantastic finish in a range of colours.

If you want to achieve a coloured finish and varnish in one go you should consider one of the Rustins Quick Drying Coloured Varnishes. These are available in gloss, satin and matt finishes in a wide range of colours. A quick drying, hard wearing coating for all interior woodwork. Low odour, non-toxic and touch dry in 20 minutes, re-coatable in 2 hours. Low odour non toxic and touch dry in 20 mins, re-coatable in 2 hours.


There's also a wide range of exterior varnishes available from Rustins One such product is the Rustins quick drying exterior varnish. This varnish is quick-drying, durable, clear coating available in Gloss and Satin. Gives long lasting protection to all external wood, and is touch dry in 30 minutes, re-coatable in 4 hours. If you're looking for a more specialist product that has flexible qualities Rustins Flexterior should meet your needs. A flexible exterior satin wood finish with ultraviolet and fungicide protection. Available in mahogany, dark oak, teak and clear. Ideal for use on all new, planed and sawn soft and hard woods. Flexterior with its special properties will not peel, crack or blister when correctly applied.

For a highly durable varnish for use outdoors you need Rustins Yacht Varnish. Specially formulated on Tung Oil to give maximum protection and durability to marine and other external woodwork. Has excellent adhesion and will not flake or peel when correctly applied. Ideal for exterior doors, window frames, cladding as well as marine woodwork. Good resistance to rain, sunlight, frost, salt and chemically polluted atmospheres may it ideal for outdoor demanding environments. 3 coats are recommended allowing at least 12 hours between coats. It can be applied over exitsing coatings as long as these are in good condition and rubbed down to provide a key.




No comments:

Post a Comment